2020/6/12 1:12:00

How to tailor cancer breast cancer rubber bracelets_bottle opener ring

mm and 202mm. it should be bigger for the ankle bracelets. So the suitable size should be 160mm for toddler, 190mm for youth and 210mm for adult. We can also bottle opener ringdo 230mm and 250mm as extra large. 1/4 inch width is good for an ankle bracelet. Same as wirstband, the logo or slogan on ankle bracelet can be printed, colorfilled, embossed printed, debossed or embossed also. We make all the bracelet matching the pantone colors. The bracelet can be solid, segment, swirl, glowing and UV transfer. We can add glitter into the bracelet, it gain the effect of little stars. We color the logo with the silicoe ink which is eco friendly as well. Usually you can choose the logo style for normal easy design. If the logo is hard, we will advise the best one. Like if the outline is less than 0.3mm thickness, we can only use printed style. As the colorfilled, embossed printed, debossed and embossed require at least 0.3mm. 

production process , so the products produced appear performance defects and practical function is reduced . Some customer are holding ready-made products for Soft-hardness comparison directly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel will have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness , the higher the defective rate of the products and the pulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high .      

trong light energy under the effect of phosphor which is very small amount added and green to human. The glow will fade gradually in about 3h depending on how much light it absorbs. It is the best one for night event. Such music show, night walk and so on. The logo can be same as regular debossed, embossed or printed on the glowing wristbands. After exposure to natural light, fluorescent light, and ultraviolet light, the phosphor can store the light energy, stop the light and release it slowly in the way of fluorescence, so the light can still be seen at night or in the dark, lasting for hours to more than ten hours. The luminescent powder can be automatically lit in the dark. The main component is rare earth, which belongs to inorganic materials. The luminous powder first absorbs a variety of light and heat, converted into light energy storage, and then automatically luminescence in the dark, by absorbing all kinds of visible light to realize luminescence. The product does not contain radioactive elements, and can bbottle opener ringe used indefinitely, especially for short wave visible light, sunlight and ultraviolet light (UV light) under 450 nanometers. Accept the ability.     id-wristbands-for-eventsentry-wristbands-for-events

breast cancer rubber bracelets